|Model:||KAISHAN Screw Air Compressor LG10/8G|
|Capacity FDA:||10 m3/min|
|Working Pressure:||0.8MPa / 8 Bar|
The operation of the economic costs
The system using 0-100% capacity no level adjust. When the air
comsumption decrease, the capacity is follow decrease, Motor
current is also reduced; When not using air, air compressor run
idle, long time run idle will automatic stop. When the air
comsumption increase, recover working. Optimal effect energy
Good environmental adaptability
Powerful cooling system design, especially suitable for high
temperature and high humidity environment in Asia. Good technique
of vibration isolation and noise reduction measures, making KAISHAN
brand screw air compressor installation without special foundation,
just leave a smallest ventilation and maintenance space, can
placement your compressor.
The design of the screw rotor type line features:
1. Fully realized "Convex-Convex" conjunction, thus helping to form
hydrodynamic lubrication film, Reduced through contact with
transverse leakage, Improve the efficiency of the compressor; And
improve the performance of machining and inspection on the rotor.
2. Use "big rotor, bearing, low speed" design train of thought,
rotate speed 30 to 50% lower than the other brands, can reduce
noise and vibration, reduce the temperature of exhaust air, improve
the rotor rigidity, prolong service life, reduce the sensitivity to
oil and impurities carbide.
3. Power range:4-355KW, which 18.5-250KW are direct connects not
with gear box,200KW and 250KW more direct connects the 4 pole
motor, low speed to 1480 r/min.
4. Fully meet or surpass GB19153-2003 <<Volumetric air
compressor energy efficiency limit value>> of national
All advanced parts keep high quality air compressor
Larger rotors are designed to ensure the air ends have slower rotor
speeds to deliver compressed air more efficiently than smaller air
This translates into energy cost savings and a longer unit life.
The rotor profile minimizes leakage and the tighter clearances
achieved through state of the art manufacturing processes results
in higher efficiency and improved lubrication.
IP54 rated, standard efficiency, IEC motors are used on every
kaishan compressor. Over sized cast iron conduit boxes make
connections easy. The industry best motor grease is used to protect
motor bearings, provide longer lubricant life, greater shear
stability and the best resistance to rust and corrosion.
The Inlet Valve is the major air flow control component in the
compressor unit.It controls air flow to the compressor,either by
opening, throttling, or closing completely in response to pressure
The latest European designed spider couplings are used to guarantee
the reliability and transmission efficiency and provide
vibration free power transmission for quiet and maintenance free
5.Oil Separation System
The three stage separation system, the result of extensive research
and development, supplies high quality compressed air. The
separation tank has two different separation stages: Centrifugal
and gravity. The third stage separation is provided by a high
performance, long life coalescent separator filter. This system limits oil vapors carryover to below 3ppm.
6.Kerry Air Filter
Kaishan series compressors use the Kerry air filter which provides
filtration to less than 3 microns Ultra Web nanofiber technology.
This technology ensures clean, unrestriced airflow for optimal
compressor operation. It has 99.99% filtration efficiency and fully
complies with ISO 5011 standards. Strategic air inlet port
positioning receives the coolest air as it enters the cabinet to
superior volumetric efficiency.
Kaishan series compressors utilize a slient,efficient and easily accessible cooling system.A wide radial fan produces greater static pressure
across the coolers at low rotational speed,assuring considerable energy saving and low operating sound.
Specification for other models